How To Keep Your Printer Clean

FREE Cleaning Kit Sample for LaserPage Subscribers

Your laser printer is full of phenomenal technologies.. capable of putting million of tiny dots on a sheet of paper with exact precision. While doing this, it also puts out some very small particles of toner dust. This dust combines with tiny bits of paper and forms a microscopic muck that sticks to just about anything. 

Many of the common problems that require a service call have their roots in this dust. So regular cleaning can prevent costly service calls later. But how can you clean something that you might not even see?

A printer technician can take apart your printer and clean all the places where we know the dust accumulates. This process is labor intensive.. you have to hire an technician, and then trust that he knows where to clean. This works, but users tell us they would rather have a system they can use themselves

CLEANING SHEETS

Most of the places where toner/paper dust causes the most damage in right in the path where the paper passes through your machine. That's why some problems like streaks and blotches seem to take care of themselves after running several prints.. the paper picks up the excess dust.

Our cleaning kits contain a special cleaning sheet. This paper is a thicker, absorbent paper.. You just put it in your paper tray and send a blank document to the printer. The cleaning sheet works like a sponge, picking up dust and cleaning the rollers throughout your printer.

TONER GRABBERS

Because there are static charges present in the printing process, dust also accumulates outside the paper path. At some point, this dust will fall back into the paper path. Also, replacing toner, pulling out paper jams can release toner that hasn't been fused to the paper.. and a little toner goes a long way.

You can use compressed air or a vacuum to move toner.. (don't rub it, it will leave a mark). It's easy to move these small particles around, but ultimately the dust will stick to something. 

Our toner grabbers have their own static charge that is activated by stretching the material. Then they pick up toner like a magnet. No cleaning solution or real work. One toner grabber can pick up a whole mess of toner.

FREE Cleaning Kit

You can order cleaning sheets and toner grabbers from Landmark Printer Service at 800-466-5687. A one use kit sells for $4.95, and comes with complete instructions. Or, order the cleaning supplies in bulk and you'll get a much more economical package.

Subscribers of LaserPage who refer their friends are entitled to a sample kit. To qualify, you need to be a subscriber, with a US mailing address and you need to be using a laser printer. This kit will cause damage if used on an inkjet printer. It is designed for laser printers.  

When you refer a friend, he gets an email message that tells how to get LaserPage and that you sent the information. We do not retain your friends address and will never reuse or sell the address. All you friends get is one message from you.

When your ready, push the Let 'em know button and you'll get a message that tell you how to get the free cleaning kit.

Your friend gets an invitation to visit LaserPage from you.. just one message and they won't be on the mailing list. You'll get one sample kit for yourself for free. (a rebate coupon for $4.95 that can be used on a single kit, or any other order)

Click on the "Send to a Friend" button above now